• <em id="9gti9"></em>
  • <tbody id="9gti9"></tbody>
    <dd id="9gti9"></dd>

    <rp id="9gti9"></rp>
    <s id="9gti9"><object id="9gti9"></object></s>

    <tbody id="9gti9"></tbody>

  • Litz

    SPECIFICATION OF LU-800

    Travel
    X-Axis Travel mm 800
    Y-Axis Travel mm 900 + 330
    Z-Axis Travel mm 620
    Spindle Nose To Table Surface mm 100 - 720
    Worktable Dimensions mm ? 800
    Worktable Load kg 1000
    Feed System
    ( X / Y / Z ) Rapid Feed m / min 48 / 48 / 48
    ( X / Y / Z ) Cutting Feed m / min 0.001 - 20
    Rotary Axis    
    A-Axis Rotation Angle degree ± 120°
    C-Axis Rotation Angle degree 360°
    A-Axis Max. Speed rpm 75
    C-Axis Max. Speed rpm 100
    Spindle
    Spindle Transmission Type   Direct Drive
    Spindle Speed (max.) rpm 12000
    Spindle Power (Continuous/S6-40% ) kw ( HP ) 17/23 kw
    Max. Torque Nm 240
    Tool Handle Spec.   # 40 BBT / CAT / DIN
    ATC
    Magazine Capacity set 32T
    Tool Change Method   DRUM
    Max. Tool Diameter/ With Adjacent Tool mm ? 75 / ? 125
    Max. Tool Length mm 300
    Max. Tool Weight kg 7
    Control
    Control   TNC-640
    Chip Conveyor   Chain Type
    Machine Occupancy (L X W Xh) mm 4528x2240x3605
    Machine Weight kg 21000

    SPECIFICATION OF LH-630A

    Travel
    Travel, X/Y/Z mm 1000/850/950
    Spindle Center To Pallet Face mm 100-950
    Spindle Nose To Pallet Center mm 150-1100
    Pallet
    Pallet Size mm 630x630
    Maximum Workpiece mm ? 1000
    Maximum Pallet Load kg 1000
    Maximum Workpiece Height mm 1000
    Pallet Surface Configuration mm 24-M16 Pitch 125
    Pallet Indexing  
    Spindle
    Spindle Max. Speed RPM 10000
    Low/Hight Gear Variation RPM 6000
    Spindle Max. Torque ( Standard ) N-m 165
    Spindle Taper   7/24 Taper , NO.40
    Spindle Bearing Id mm 70
    Spindle Transmission   Direct
    Feed Rate
    Max. X/Y/Z Rapid Speed mm/min 32000
    Cutting Feed Rate mm/min 1-10000
    Job Feed Rate mm/min 1260
    Automatic Tool Change (ATC)
    Type Of Tool Shank   ISO 40 or BBT-40
    Tool Capacity one of a pair 60
    Max. Tool Diameter (Without Adjacent Tool) mm 80(160)
    Max. Tool Length mm 450
    Max. Tool Weight kg 8
    ATC Changing Time ( T to T ) sec. 5
    Tool Selection Method   Fixed Address
    Automatic Pallet Changer (APC)
    Number of Pallets one of a pair 2
    Pallet Changing Type   Rotary Type
    Time For APC sec. 18
    Controller System
    FANUC   0i-MF
    Motor
    Spindle Motor, Power KW 22/26
    Spindle Motor N.m 165
    X/Y/Z/B Axis Motor KW 7 / 7 / 7 / 3
    Motor, Hydraulic System KW 2.2
    Motor, Coolant Pump System KW 1.6
    Power Supply
    Power Requirement  KVA 42
    Capacity Of Oil/Coolant Tank
    Capacity, Hydraulic System L 60
    Capacity, Lubrication System L 4
    Capacity, Coolant System L 800
    Mechanical Specifications
    Height mm 3362
    Floor Area mm 5966x3570
    Weight kg 23000

    SPECIFICATION OF TV-500

    Travel For 3-Axes
    X-Axis Travel mm 500
    Y-Axis Travel mm 400
    Z-Axis Travel mm 330
    Spindle Nose To Workable Surface mm 170 - 500
    Spindle
    Spindle Speed rpm 12000
    Automatic Tool Changing System
    Number of Tools one of a pair 16
    Max. Tool Diameter ( No Adjacent Knife ) mm 60 / 80
    Max. Tool Length mm 250
    Max. Tool Weight kg 3
    Tool Changing Method   Disc Type
    Tool Specifications   BT-30
    Motor
    Spindle Motor (Continuous/30min. Rated) kw ( HP ) 3.7 / 5.5
    Motors On X/Y/Z-Axis kw 1.5 / 1.5 / 2.2
    Worktable
    Worktable Area mm 650 x 400
    Worktable Max. Load Capacity kg 250
    T-Slot (Number X Width X Distance From The Center) mm 3 x 14 x 125
    Rapid Speed
    X-Axis Rapid Speed M/min 60
    Y-Axis Rapid Speed M/min 60
    Z-Axis Rapid Speed M/min 60
    Cutting Feed Rate mm/min 1 - 20000
    Controller
    Mitsubishi   M80
    Miscellaneous
    Machine Weight kg 2500
    Power Consumption KVA 15
    Coolant Tank Capacity L 200
    Compressed Air Source kg/cm2 6

    SPECIFICATION OF DV-800

    Travel For 3-Axes
    X-Axis Travel mm 800
    Y-Axis Travel mm 500
    Z-Axis Travel mm 540
    Spindle Nose To Workable Surface mm 150~690
    Spindle
    Spindle Speed rpm 10000
    Automatic Tool Changing System
    Number of Tools one of a pair 24
    Max. Tool Diameter mm 80/125
    Max. Tool Length mm 270
    Max. Tool Weight kg 8
    Tool Changing Method   Arm
    Tool Specifications   BBT-40
    Motor
    Spindle Motor (Continuous/30min. Rated) kw(HP) 7.5/11(10/15)
    Motors On X/Y/Z-Axis kw 2.0/2.0/3.5
    Worktable
    Worktable Area mm 910X500
    Worktable Max. Load Capacity kg 500
    T-Slot (Number X Width X Distance From The Center) mm 5 x 18 x 100
    Rapid Speed
    X-Axis Rapid Speed M/min 36
    Y-Axis Rapid Speed M/min 36
    Z-Axis Rapid Speed M/min 24
    Cutting Feed Rate mm/min 1-20000
    Controller
    Mitsubishi   M80
    Miscellaneous
    Machine Weight kg 5300
    Power Consumption KVA 20
    Coolant Tank Capacity L 290
    Compressed Air Source kg/cm2 6